Glass partitions plumbing

Sanitary partitions, most often, installed in the bathrooms of office space, public institutions and agencies. Occasionally they are placed on the base of apartments, of houses and cottages, moreover, make it, mostly, for decorative purposes.

Most models available partitions are made of chipboard. However, for those, who wants to equip the room to match their company or organization, Plumbing sags of glass are offered.

Glass products are not only beautiful, but also practical. They do not respond to high humidity, They differ in high strength, durability. They do not need additional decorative processing. In order to give the material maximum strength, use several methods of its production processing. Consider, What are the differences between them.

Glass partitions

1. Hardened. From hardened glass, most often, Pussier are made, showers. This material is much more practical than ordinary glass, since it is able to withstand sharp temperature changes, mechanical exposure and sharp blows. The frame is obtained using a thick base, which is then covered with polyester film and a layer of special glue. These coatings tolerate part of a mechanical blow to themselves. They protect the surface from scratches and chips. If the partition still does not withstand and crumbles, then her fragments will not be sharp, And rounded, stupid. They look like fragments, which are obtained when beating car glasses.

1. Reinforced. Glass of this type consists of two layers, between which a special reinforced mesh was inserted. It has many cells of different sizes. For obvious reasons, The frame will be opaque, can have a glossy color coating. The size of the cells of the grid is different. It can start from 12.5 mm, And end 25 mm. In this case, the grid is laid at least for 15 mm from the surface, Therefore, it is also necessary to "get" to her too. Such toilet partitions are considered safer, since they do not fly to fragments, and remain on top of the grid.
2. Triplex. Its strength is guaranteed due to the multi -layer of the material. It consists of several different glasses. for example, Some manufacturers combine color materials, Ordinary and hardened. They are connected by high temperature. For additional strengthening between them is the polyvinylButil composition. How an alternative is sometimes used by a film. Shards remain on it.