Egoza - an additional means of protecting the territory

To protect the territory from illegal entry into it by third parties through fences, you can use additional security features. Selecting options from among them, it is worth paying attention to the spiral design of the egoza flat, You can purchase the material from Zabor24.

Where is the obstacle placed??

You can mount barbed wire on almost any fence. The only thing is that it makes no sense to install it on fences, from materials, which are easily damaged. In these situations, the egoza is mounted on the outside of the structure or laid out in front of the fence on the ground..

Protection is then placed over the fence, if it's easier to climb over the fence, than to break his canvas. That is, on concrete structures or other, with high strength. Quite often, egoza flat is used for fences made of corrugated board. The wire itself is attached in various ways..

The main types of Egoza

There are a lot of Egoza options, but they are all derivatives of two kinds:

• MIND. A tape with sharp blades is fixed on a metal wire.
• ASKL. Derivative tape from AKL. Here the blades are located in several planes due to the twisting of the tape.

From these types, a variety of designs are already being created - flat and voluminous.

Advantages and disadvantages

Thanks to the installation of Egoza, the protection of the protected area is increased several times. It will take a long time to remove such a wire and it cannot be done quietly.. The barrier has the following features:

• voltage can be connected to the wire;
• long service life (more 25 years);
• corrosion resistant;
• low cost;
• simplicity of installation.

The only drawback of the obstacle is that it somewhat worsens the design of the fence..

How the protection is mounted?

Egoza can be installed in different ways:

• Use straight brackets, a thorn is attached to them in a row in a spiral or plane.
• If two or more rows are required, brackets can be used- or Y-shaped. They will help create a three-dimensional structure.
• To fix the spiral, semi-circular fasteners are used.

How is the installation?

You can strengthen the protection of your fence yourself. Before installing the barrier, you will need to prepare tools: drill, mounts for brackets, staples, pliers, thick wire, Egoza itself and the ladder. Further work consists of several steps:

• Brackets are fixed to the fence posts.
• A wire is installed between them from above and below..
• Egoza is mounted on the wire.
• Using staples, barb attached to wire.

Additional installation tips

In the process of working with sharp products, you can cut yourself and to avoid this, work in protective gloves and high-density clothing. If there is work at height, it is necessary to use a ladder or goats - so as not to accidentally fall on the wire. It is advisable not to work independently, and two or even three. If Egoza is installed on a structure made of corrugated board, many weld brackets to it, increasing the reliability of fastening.