Finishing work in the bathroom

If you want, so that the renovated bathroom has pleased you for many years? Specialists "Husband for an hour. Kirovograd "guarantee the quality of work execution! In our state - experienced builders and designers with specialized education. It is possible to travel to Kirovograd. Our employees will not only make repairs, but they will solve all the related issues. We offer to order a full range of work and use a 50%discount on the preparation of a design project!

Repair in the bathroom

Wall and floor tiles in the bathroom

Ceramic, Tile tiles, Porcelain tiles are known for their resistance to high humidity and ease of care. Modern manufacturers produce collections, including flooring and walls. Also, the set includes decorative inserts and borders for finishing the junction between the wall and the side of the bath. Sure, you can not order an expensive collection, and purchase several types of tiles separately and create your own interesting combination.

The process of laying tiles includes the following stages.

• Surface preparation. First of all, it is necessary to eliminate the old coating. Typically, a punch with a nozzle is used for this. The walls are cleaned of the residues of the construction mixture, Spit and primed. The surface is reinforced with a construction metal mesh: This increases tile resistance. A screed is made on the floor. There are two of its varieties: Dry and wet. The latter is considered the most reliable. It is also advisable to make waterproofing on the floor.
• Surface marking. If it is planned to combine tiles of different colors and sizes, It is advisable to make a “drawing” on the surface indicating the location of each variety. The first line of the coating is also drawn. On the walls, vertical control lines are also drawn.
• Preparation of glue. One of the popular compositions is a cement -based mixture, They provide high adhesion. The exact method of cooking glue the manufacturer indicates the packaging.
• laying. Glue is applied to the tile by means of a gear spatula. The thickness of the mixture layer thickness depends on the shape of the tool. Tile is neat, but tightly pressed against the wall, First, the lower edge is applied, Then the upper one. Light tapping with a rubber hammer will help to fix fragments. It is important to check, Is the tile evenly attached, For this, levels and plots are used. Until the glue has grabbed, The fragment can be moved. Plastic crosses stick into the seams between the tiles;
• Swed processing. The drying of the solution takes many hours, At this time, it is necessary to protect the tile from contacts with water and mechanical pressure. Next, the seams are processed by grout - composition, preventing their destruction. You can use grout on epoxy, cement, silicate basis. Construction stores offer compositions of various colors for different types of tiles. Grout is applied to the seams using a rubber spatula. So as not to dirty tiles, The space next to the joints can be sealed with painting tape. Excess grouts are removed with a damp sponge.

Planning repairs in the bathroom? Our masters will help you! To clarify the conditions of cooperation and the timing of work, Contact specified contacts