Air conditioners. Multi split systems. What the buyer needs to know?
What to do if it is necessary to provide a large trading floor with air conditioning systems, an extensive network of office premises, a restaurant? If you need to cool several rooms at once, and among the abundance of premises in your apartment there are so-called walk-through rooms, that is those, that do not have direct contact with the outer wall? With all the fact that there is no frank desire to spoil the appearance, The exterior of the house, Especially if it is a private building. Multi split system (https://energywest.com.ua/konditsionery) – perfect output in these situations.
This climatic complex similar in terms of its principles for the work of the split system, only unlike the latter, it provides an opportunity to connect to one external unit from 2 to 8 internal blocks.
The blocks themselves are of different types:
- Wall;
- Channel;
- Cassette;
- Paintings.
Each internal unit of the system is connected to the external using a special train - a freon line. Usually, The external unit is powerful enough to maintain a sufficient level of functioning of all internal blocks.
This air conditioner has a number of its advantages:
- The installation is quite simple. Only one hole in the wall needs to be made and not suffer from the endless, Cutting noise of loud perforators, drones. Like the owners, owners of premises and their neighbors, guests are not threatened by imprisonment and headache for a long time;
- Do not take up much space outside the facade and do not spoil the appearance of the building;
- The ability to maintain different air regimes in different rooms
- Almost complete noise, Due to that, that the external block is just one;
- Economic electricity consumption
- Air conditioning systems, Based on channel blocks, can work in conjunction with ventilation systems
On the issue of maintenance of multi split systems, it is recommended to carry it regularly in combination with comprehensive technical inspections. This will help save savings, reduce the total support price and largely prevent emergency situations and an unplanned failure. Well, of course, that the purchase and installation of a new air conditioner for the house and disposal of the old, the unfit system will result in a considerable amount. The effectiveness of cooling systems over time gradually decreases and this fact determines periodic cleaning of the heat exchangers of the system and refueling by freon. But the refueling by freon is carried out in several ways.
For ordinary multi -split systems - this is a very simple procedure, You can refue to be guided by the pressure level and the air conditioner goes to its usual pressure level - 3.6–3.9 bar at temperatures on the street from +24 to +30. But the system can be multi -compressor, And in this case, each compressor circuit must be refined separately. Inverter air conditioning requires a different approach, since they have protection elements plus a system of automatic leveling of pressure levels, and refueling in a similar way is strictly not recommended. The pressure of pressure in this variety of the system is noted only in case of a critical decrease. And the main difficulty is, that an extremely small or extremely large amount of freon is shown the same. There is no way to differentiate. If you refuel the method by which the usual indoor air conditioner is being refined, you can ruin it. Exceptionally full weight refueling.
Source: energywest.com.ua
0 Comments