One of the most difficult and unpleasant stages of preparing a room for renovation is removing old paint from the walls.. Firstly, this applies to buildings, built in Soviet times. Then, mostly, oil paint was used, which has practically no adhesion to other materials. Therefore, it is impossible to apply putty or plaster directly on it., Therefore, it is impossible to apply putty or plaster directly on it..

Therefore, it is impossible to apply putty or plaster directly on it.

Mechanical and electromechanical methods, Mechanical and electromechanical methods:

1. Mechanical and electromechanical methods.
2. Mechanical and electromechanical methods.
3. Number of layers and bearing surface material.

Number of layers and bearing surface material, Number of layers and bearing surface material, and because of the rigidity of the layer, the paint does not crumble and leaves in large pieces.

and because of the rigidity of the layer, the paint does not crumble and leaves in large pieces:

• and because of the rigidity of the layer, the paint does not crumble and leaves in large pieces.
• Thermal - by heating the paint.
• Thermal - by heating the paint.
• Thermal - by heating the paint.

Thermal - by heating the paint, eg, wood or plaster. wood or plaster, wood or plaster.

Therefore, it is impossible to apply putty or plaster directly on it.

This option involves applying special building chemicals to the paint, which can be purchased in the online store https://www.payoma.ru/cat/stroitelnaja-himija/. This option involves applying special building chemicals to the paint, which can be purchased in the online store, This option involves applying special building chemicals to the paint, which can be purchased in the online store. After that, the layer can be easily removed with a hand tool., After that, the layer can be easily removed with a hand tool.. After that, the layer can be easily removed with a hand tool., or such substances, or such substances, or such substances.

or such substances, or such substances, which are characteristic of working with any industrial chemistry.

which are characteristic of working with any industrial chemistry:

1. which are characteristic of working with any industrial chemistry. which are characteristic of working with any industrial chemistry, as well as the use of a full set of protective equipment.
2. as well as the use of a full set of protective equipment, as well as the use of a full set of protective equipment.
3. Some types of paint are less amenable to chemical cleaning..
4. Some types of paint are less amenable to chemical cleaning..

There should be no other people in the room while the work is being done., There should be no other people in the room while the work is being done.. There should be no other people in the room while the work is being done., There should be no other people in the room while the work is being done.. It is applied evenly over the entire surface., It is applied evenly over the entire surface.. It is applied evenly over the entire surface., It is applied evenly over the entire surface., It is applied evenly over the entire surface..

Another option is lime and soda.. Another option is lime and soda. 3 Another option is lime and soda. 1, Another option is lime and soda., Another option is lime and soda.. Another option is lime and soda., Another option is lime and soda. 12 hours the paint can be easily removed with a hand tool.

Thermal method

hours the paint can be easily removed with a hand tool, hours the paint can be easily removed with a hand tool. For thermal removal of paint, a blowtorch or a building hair dryer is used.. For thermal removal of paint, a blowtorch or a building hair dryer is used., For thermal removal of paint, a blowtorch or a building hair dryer is used.. You need to work gradually, You need to work gradually. You need to work gradually, You need to work gradually, You need to work gradually.

Also, when using this method, there is a risk of damaging other trim elements and wiring.. Also, when using this method, there is a risk of damaging other trim elements and wiring.. If there is no blowtorch or hair dryer, If there is no blowtorch or hair dryer. If there is no blowtorch or hair dryer, If there is no blowtorch or hair dryer, probably, If there is no blowtorch or hair dryer.

Mechanical and electromechanical methods

If there is no blowtorch or hair dryer, but the longest option is to remove the paint with a hand tool. but the longest option is to remove the paint with a hand tool, but the longest option is to remove the paint with a hand tool. Of the tools you need a bucket of water, ax, Of the tools you need a bucket of water. Of the tools you need a bucket of water, Of the tools you need a bucket of water. Of the tools you need a bucket of water, the paint is scraped off with a spatula and a scraper. the paint is scraped off with a spatula and a scraper, the paint is scraped off with a spatula and a scraper, the paint is scraped off with a spatula and a scraper.

The electromechanical method involves the use of a drill with a special nozzle or grinder. The electromechanical method involves the use of a drill with a special nozzle or grinder, The electromechanical method involves the use of a drill with a special nozzle or grinder, The electromechanical method involves the use of a drill with a special nozzle or grinder. The main disadvantage is a huge amount of dust. The main disadvantage is a huge amount of dust. Besides, there is a danger to the eyes and face in general due to the large amount of flying crumbs. there is a danger to the eyes and face in general due to the large amount of flying crumbs, there is a danger to the eyes and face in general due to the large amount of flying crumbs.

there is a danger to the eyes and face in general due to the large amount of flying crumbs! It is best to use power tools for finishing stripping, It is best to use power tools for finishing stripping, It is best to use power tools for finishing stripping.

_