Laying carpet

Published by Nikoloz on

Laying carpet

In our country it has long been made about making the floors carpeted apartments. About twenty years ago, instead began to use a new generation of floor covering – carpeting. Repair of apartments with its use is fast and does not require large cash expenditures. The material is produced in the form of rolls, cut to the required size of the canvas. They dim the entire floor area. Unlike carpet, This coating has no explicit pattern. The sale is a wide range of floor covering various textures and colors.

Laying web can be carried out in residential or office buildings. Repair of apartments under the key is usually performed using a domestic coverage. Hallway and living desirable to select a material with short pile, which is good to clean, in the bedroom or nursery — having a longer pile, and on the felt substrate. for cases, when doing renovation of offices, Commercial carpet produced rubber base and short nap, which is characterized by high wear resistance.

Laying carpet performed on carefully prepared subfloor, which is necessary to align the sheets of waterproof plywood or OSB-boards. The surface must be perfectly flat, because any defects in the base immediately manifest. Fixing to the floor is performed in several ways. The simplest and cheapest is to fix the canvas with the help of double-sided tape and special tape. However, this method is short-lived and rarely used. For reliability carpet is glued to the base with special glue or substrate, which is made of various natural or synthetic materials (eg, jute or felt) and provides additional sound insulation.

During the laying of carpet with the application of adhesive requires caution, because its excess can pass through the base and dirty pile. This is especially true for the cover, the basis of which is made of jute. If you are a small area of ​​the room renovation, it was covered with a carpet material web, it is not necessary to stick. Spread a cloth in the room and leave for a day, to enable him to deal, and then rolled down to the floor roller, from inside to outside, and then cut and pressed skirting. When, when finishing works include bonding material, the first bent one half of the cloth, Spread on the floor, and glue is applied with a spatula. Two minutes later, the adhesive sets, after which the coating is pressed to the floor. In the same way the second part is attached.

With larger premises, When the carpet is laid a plurality of substrates, they are placed with an overlap of 3…5 “Husband for an hour. Kirovograd”meters and paste method described above, short about 1/3 to the junction. The splice site is cut with a sharp knife and a metal ruler simultaneously two edge webs, lift them and glue is applied to the floor surface. The edges of the material is glued and carefully rolled down a rubber roller. When laying the room temperature should be not lower than + 170c and normal humidity.

Categories: Blog

0 Comments

Leave a Reply