The main malfunctions of hobs

The technical structure of gas panels is not particularly complicated. Anyone can easily understand the principle of the slab. However, many stops, that the gas is burned by infrared radiation. Do REPAIR of the hob The specialist must, but the owner needs to know, What can he encounter during the operation of equipment, What breakdowns are most common, How to eliminate them.

The principle of operation of the panel

The burner lights up behind 2 seconds with electric ignition. So that the flame does not fade, necessary 5 to hold a pressed handle. If the flame is extinct, The burner should turn off automatically. If the work process is not in the way, means, you need to contact the master.

Characteristic breakdowns of gas hobs

1. When the handle is released, the burner goes out – The most common problem. The problem is the depreciation of the gas supply or crane supply system, as well as in the case of clogging the nozzle or a defect in the switching handle. To eliminate the problem, you need to inspect the above elements and understand, What is the problem. If there is no defect, then you need to replace the thermocouple or electromagnetic valve. It is better if such a repair of the hobs is carried out by the master.
2. Electric ignition malfunction. This is not a significant problem, You can use matches. The cause of the malfunction may be broken by the firing unit or absence of voltage in the outlet, Contacts could be oxidized at the inclusion button. To eliminate the breakdown, check the network. You need to take the operating device and insert into the outlet. Visually examine the contacts, If they are oxidized, Clean them with alcohol. If there is no problem with the outlet, but electric ignition does not work, then you need to replace the ignition unit.
3. The nozzles are clogged. With prolonged use, they clog, And the gas begins to lightly burn. We need periodic maintenance. You can get rid of this problem yourself. Remove the burner and clean the nozzle with a toothpick and be sure to clean the place around it.
4. The crane does not turn. In the case of this dangerous breakdown, you can lose the entire unit. Cross the gas and call the gas service. The reason may consist of high humidity inside the device. Correct such problems should only be in special plates repair services, We recommend contacting the SC "Fix Service", Read more on the site https://servicecenter.co.ua/. The crane must be disassembled, Clean, Remove pollution and lubricate.
5. The burner does not light up. This problem occurs over the years with prolonged use of the stove. The causes of the appearance may be the destruction of the candle or damage to the integrity of the mudwall wire. To eliminate the problem, you need to press the electric fire in the evening and watch the spark:
   • If not her, Available types of tower cranes, The wire is damaged;
   • The spark hit the panel - there is damage on the candle;
   • spark red or yellow, means, The ignition block has worn out.

Problems of the electric panel

1. The panel works minutes 10 And turns off. Such a breakdown appears when the panel is overheated, A mistake is knocked out on her display. Such a malfunction occurs due to overheating of the burner or sensor sensor. To eliminate this problem, Deange the stove. Then turn on. When re -knocking out the error, it is necessary to diagnose the sensor and the heating relay, as well as management. If there are no defects, then you need to replace the fee.
2. The burner does not light up. This is a common problem, The cause may be a burned switch or rupture in the heating element chain. Diagnosed by the multimeter switch and burner. Such elements are not subject to repair.

At some, As you think, slight malfunction, Do not pull - call the master to timely eliminate the defect. A prophylactic examination will be a good decision at least a year. You can call a specialist at home right now: (044) 222 – 63 – 25.